Air conditioning problems and repairs

If your air conditioner turns on but does not produce cold air, make sure all of the vents are open, and the thermostat is properly set. Check the air filter if none of these is the issue. There will be no airflow if it is clogged with dirt or other debris. Since clog may cause the evaporator coils to freeze, the ice and frost will further hinder the airflow. If this is the case, thoroughly clean the filter with a soft brush, mild soap, and water.

Air conditioner not cooling enough-

Check your vents to ensure that they are all open. If even one of them is closed, the warm air from the room with the closed vent will mix with the cooled air from the others, making it more difficult to cool your entire home. Otherwise, you could be dealing with another issue, such as a leak in your refrigerant line.

Air conditioner leaking water inside-

Turn off your air conditioner if it leaks water inside your home to avoid costly water damage. Water may be backing up into your home due to a clogged condensate drain line. To unclog the line, do-it-yourselfers can use a wet/dry vacuum. If that doesn't work, it's possible that your drain pan has rusted or that your condensate pump has failed.

AC won’t turn off-

If your air conditioner runs for longer than it should, you may have a clogged filter. Check to see if cleaning or replacing your filter solves the problem. If your system is old or undersized, it may work too hard, cycle too frequently, and have difficulty shutting down.

Other problems that may cause your AC to run constantly include:

• A stuck fan relays

• A short in the thermostat cable

• A thermostat that’s gone bad

Thus it is important to seek air conditioning repairs in Kelowna or other parts of the world instantly to avoid any unnecessary problems that may arise.

To know more about air conditioning repairs Kelowna and For more info please visit Our Website.